You are here: Home / Products / Industrial Valves / Pressure Regulagtors / Pressure Regulators with electric shut-off RSAS Series

Product Category

Hot-Selling Products

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Pressure Regulators with electric shut-off RSAS Series

Availability:
Quantity:


Technical parameters:

Nominal pressure: 2.8MPa         Applicable temperature:-50℃~+150℃

Test pressure: 4.2MPa                 Applicable medium:ammonia,fluorine,etc.


Characteristics:

- RSAS is made up of one main valve AM3 and one pilot valve. Different pilot valves can make different regulators:AM3+ACVP-L(0 to 10 bars)can make RSAS,AM3+ACVP-H(4 to 25 bars)can make RSAS-H. This regultor also comined with one solenoid pilot AEVM-NC. When the coil is currentless, pilot ACVP does not work, main valve closes.

- The pressure of RSAS series can be set based on orders in the factory before delivery. We can also supply the regulator with solenoid valve AEVM-NO by order.


Operation:

- Same as the RAS regulators,the pressure regulators RSAS,control the inlet RSAS-1

  pressure of main valve. Regulators open when the pressure exceeds the 

  set pressure on the control pilot, but only if the coil of the solenoid pilot 

  have been energized.

- When the pilot open, the inlet fluid pass to the top of piston to open

  the main valve.

- The pressure regulators close again when the inlet pressure decreases 

   below the set pressure on the pilot,or the coil of solenoid pilot have 

   been de-energized.


Applications:

The pressure regulators RSAS are designed to work with ammonia and other fluorinated refrigerants, to control temperature, opening the valve or defrost, dosing the pass of fluid through the main valve.


RSAS-2





Previous: 
Next: